C8300系列路由器专题：https://www.jhj.cn/cisco-c8300
Figure 4.
Cisco single-wide service module carrier card for 2x NIMs (C-SM-NIM-ADPT)
C-SM-NIM-ADPT是一种用于Catalyst 8300系列平台的SM-X型双NIM载体卡。该模块支持多种NIM，包括Catalyst 8000平台的C-NIM第3层广域网模块。有关支持的模块列表，请参见表6。由于它通过两条10 Gbps链路连接到背板，因此即使安装了两个10 Gbps C-NIM-1X模块，该载波卡也不会对流量造成任何瓶颈。它支持完全在线插入和删除。除了可用的SM-X插槽外，Catalyst 8300系列平台中可以安装的C-SM-NIM-ADPT卡的数量没有上限。
The C-SM-NIM-ADPT is a dual-NIM carrier card in an SM-X form factor for Catalyst 8300 Series platforms. This module supports a wide variety of NIMs, including the C-NIM Layer 3 WAN modules for the Catalyst 8000 platforms. See Table 6 for a list of supported modules. Since it connects to the backplane with two 10-Gbps links, this carrier card will not impose any bottleneck on traffic, even if two 10-Gbps C-NIM-1X modules are installed. It supports full online insertion and removal. There is no upper limit on the number of C-SM-NIM-ADPT cards that can be installed in a Catalyst 8300 Series platform, other than available SM-X slots.
Table 4. Modules supported on Cisco Catalyst 8300 Series Edge Platforms
|
Product number |
Description |
| Ethernet Layer 3 modules | |
| C-NIM-1X | 1-port 10Gbps SFP/SFP+ NIM with WAN MACSec |
| C-NIM-1M | 1-port 2.5/1Gbps RJ-45 WAN, 90W Poe 802.3 af/at/bt NIM |
| C-NIM-2T | 2-port 100Mbps/1Gbps dual-mode RJ45/SFP, NIM with WAN MACSec |
| LAN modules | |
| NIM-ES2-4 | Cisco 4-port Gigabit Ethernet switch NIM |
| NIM-ES2-8 | Cisco 8-port Gigabit Ethernet switch NIM |
| NIM-ES2-8-P | Cisco 8-port Gigabit Ethernet switch NIM with PoE support |
| C-SM-16P4M2X | Cisco 22-port Catalyst L2 switch module with UADP ASIC |
| C-SM-40P8M2X | Cisco 50-port Catalyst L2 switch module with UADP ASIC |
| Compute modules | |
| UCS-E160S-M3/K9 | UCS-E, single-wide, Intel Broadwell 6-core CPU; up to 64 GB RAM, 1-2 HDD |
| UCS-E180D-M3/K9 | UCS-E, double-wide, Intel Broadwell 8-core CPU; up to 128 GB RAM, 1-4 HDD |
| UCS-E1120D-M3/K9 | UCS-E, double-wide, Intel Broadwell 12-core CPU; up to 128 GB RAM, 1-4 HDD |
| Voice modules | |
| NIM-2FXO | 2-port FXO NIM |
| NIM-4FXO | 4-port FXO NIM |
| NIM-2FXSP | 2-port FXS NIM |
| NIM-4FXSP | 4-port FXS NIM |
| NIM-2FXSP/4FXOP | 2-port FXS and 4-port FXO NIM |
| NIM-4E/M | 4-port E/M NIM |
| NIM-2BRI-NT/TE | 2-port BRI (NT and TE) NIM |
| NIM-4BRI-NT/TE | 4-port BRI (NT and TE) NIM |
| SM-X-8FXS/12FXO | 8-port FXS and 12-port FXO single-wide service module |
| SM-X-16FXS/2FXO | 16-port FXS and 2-port FXO single-wide service module |
| SM-X-24FXS/4FXO | 24-port FXS and 4-port FXO single-wide service module |
| SM-X-72FXS | 72-port FXS double-wide service module |
| NIM-PVDM-32 | 32-channel Voice DSP NIM Module |
| NIM-PVDM-64 | 64-channel Voice DSP NIM Module |
| NIM-PVDM-128 | 128-channel Voice DSP NIM Module |
| NIM-PVDM-256 | 256-channel Voice DSP NIM Module |
| SM-X-PVDM-3000 | 3080-channel high-density voice DSP module |
| SM-X-PVDM-2000 | 2048-channel high-density voice DSP module |
| SM-X-PVDM-1000 | 1024-channel high-density voice DSP module |
| SM-X-PVDM-500 | 768-channel high-density voice DSP module |
| NIM-1MFT-T1/E1 | 1-port multiflex trunk voice/clear-channel data T1/E1 module |
| NIM-2MFT-T1/E1 | 2-port multiflex trunk voice/clear-channel data T1/E1 module |
| NIM-4MFT-T1/E1 | 4-port multiflex trunk voice/clear-channel data T1/E1 module |
| NIM-8MFT-T1/E1 | 8-port multiflex trunk voice/clear-channel data T1/E1 module |
| DSL/broadband | |
| NIM-VAB-A | Multi-mode VDSL2/ADSL/2/2+ NIM Annex A |
| NIM-VA-B | Multi-mode VDSL2/ADSL/2/2+ NIM Annex B |
| NIM-VAB-M | Multi-mode VDSL2/ADSL/2/2+ NIM Annex M |
| NIM-4SHDSL-EA | Multi-mode G.SHDSL NIM |
| ISDN BRI for Data | |
| NIM-2BRI-S/T | 2-port ISDN BRI WAN interface card for data |
| NIM-4BRI-S/T | 4-port ISDN BRI WAN interface card for data |
| Channelized T1/E1 and ISDN PRI | |
| NIM-1CE1T1-PRI | 1-port Multiflex trunk voice/channelized data T1/E1 module |
| NIM-2CE1T1-PRI | 2-port Multiflex trunk voice/channelized data T1/E1 module |
| NIM-8CE1T1-PRI | 8-port Multiflex trunk voice/channelized data T1/E1 module |
| Serial WAN interface | |
| SM-X-1T3/E3 | 1-port clear-channel T3/E3 service module |
| NIM-1T | 1-port serial high-speed WAN interface card |
| NIM-2T | 2-port serial high-speed WAN interface card |
| NIM-4T | 4-port serial high-speed WAN interface card |
| Async WAN interface | |
| NIM-16A | 16-port Asynchronous Module |
| NIM-24A | 24-port Asynchronous Module |
| Wireless WAN (LTE) | |
| P-5GS6-GL | 5G Sub-6 GHz Pluggable – Global |
| P-LTEAP18-GL | 4G/CAT18 LTE Advanced Pro Pluggable – Global |
| P-LTEA-EA | 4G/CAT6 LTE Advanced Pluggable for North American and Europe |
| P-LTEA-LA | 4G/ CAT6 LTE Advanced Pluggable for APAC, ANZ, and LATAM |
| NIM-LTEA-EA | LTE Advanced for Europe and North America |
| NIM-LTEA-LA | LTE Advanced for Asia Pacific, Australia and LATAM |
| NIM Carrier Adapter Card | |
| C-SM-NIM-ADPT | Single-wide 2x NIM carrier module in SM-X form factor |
Cisco Catalyst 8300 系列边缘平台是卓越的 5G 就绪型云边缘平台，专为快速服务、多层安全、云原生敏捷性和边缘智能而打造，旨在加快您的云转型步伐。
Cisco Catalyst 8300 Series Edge Platforms
Cisco® Catalyst®8300 系列边缘平台结合 Cisco IOS® XE SD-WAN 软件，可为分支机构提供安全的云级思科 SD-WAN 解决方案。Catalyst 8300 系列平台专为实现高性能的一体化 SD-WAN 服务而设计，可以灵活地从云端或本地同时提供安全和网络服务，具备更高的 WAN 端口密度和冗余电源能力。该系列平台支持从低到高多种模块密度，向后兼容各种现有的 WAN、LAN、语音和计算模块，并提供多种接口选项供您选择。由完全可编程的软件架构 Cisco IOS XE 以及 API 的支持，该系列平台可加速大规模自动化，确保在实现零接触 IT 功能的同时，将工作负载迁移到云端。Catalyst 8300 系列还配备 Trustworthy Solutions 2.0 基础设施，可通过完整性验证和威胁补救措施来保护平台免受威胁和漏洞攻击。
8300 系列非常适合大中型企业的分支机构，可借助集成式 SD-WAN 服务满足对高 WAN IPsec 性能的需求。
平台详细信息
型号和配置
图 1 至图 4 重点介绍 Catalyst 8300 系列边缘平台包含的不同型号。
图 1.
C8300-2N2S-4T2X 平台：具有 2 个 SM 插槽和 2 个 NIM 插槽，以及 2 个万兆以太网端口和 4 个千兆以太网端口（C8300 2RU，支持 10G WAN）
图 2.
C8300-2N2S-6T 平台：具有 2 个 SM 插槽和 2 个 NIM 插槽，以及 6 个千兆以太网端口（C8300 2RU，支持 1G WAN）
图 3.
C8300-1N1S-4T2X 平台：具有 1 个 SM 插槽和 1 个 NIM 插槽，以及 2 个万兆以太网端口和 4 个千兆以太网端口（C8300 1RU，支持 10G WAN）
图 4.
C8300-1N1S-6T 平台：具有 1 个 SM 插槽和 1 个 NIM 插槽，以及 6 个千兆以太网端口（C8300 1RU，支持 1G WAN）
